ca88亚洲城塑胶原料

在线留言/ 新闻资讯

全国服务热线0769-86999621
ca88亚洲城塑胶原料
Ca88亚洲城娱乐官网
营销热线:13652631743

联系人:蒋先生

邮箱:plascn@163.com

地址:东莞市常平镇大京九塑胶城B栋

当前位置:塑胶原料 > 新闻资讯 > 常见问题 >

SABIC/DX11354/PC物性表参数

责任编辑:ca88亚洲城发表时间:2018-04-12

SABIC LNP THERMOCOMP PC  DX11354这是一种具有良好电镀、表面和机械性能的PC复合材料,是激光直接结构应用的理想选择。
SABIC PC  DX11354塑料树脂的充分分散,有效地提高了塑料的耐热、耐候、耐磨等性能,高冲击塑料能使普通塑料具有象陶瓷材料一样的刚性和耐热性,同时又保留了塑料本身所具备的韧性、耐冲击性和易加工性。是一种高科技的新材料,具有很好的发展前景.
SABIC PC DX11354物性表PDF文档下载
以下是SABIC沙伯基础创新LNP THERMOCOMP  PC DX11354物性表参数
SABIC LNP THERMOCOMP®PC DX11354物性表参数
The property table is provided by www.cn-plas.com, welcome to download, reprint please indicate the source!
Material Notes:
This is a PC compound with good plating, surface and mechanical performance, a good candidate for Laser Direct Structuring applications.
Physical Properties物理性质
Metric公制数据
English英制数据
Comments测试方法
Specific Gravity 
1.30 g/cc
1.30 g/cc
ASTM D 792
Density密度
1.36 g/cc
0.0491 lb/in³
ISO 1183
Moisture Absorption at Equilibrium吸湿平衡
0.12 %
0.12 %
23°C / 50% RH; ISO 62
Water Absorption at Saturation吸水率
0.29 %
@Temperature 23.0 °C
0.29 %
@Temperature 73.4 °F
ISO 62
Linear Mold Shrinkage, Flow线性收缩率/流动
0.0020 - 0.0050 cm/cm
@Thickness 3.20 mm
0.0020 - 0.0050 in/in
@Thickness 0.126 in
SABIC Method
Linear Mold Shrinkage, Transverse 
0.0020 - 0.0050 cm/cm
@Thickness 3.20 mm
0.0020 - 0.0050 in/in
@Thickness 0.126 in
SABIC Method
Melt Flow熔体流动速率
7.0 g/10 min
@Load 1.20 kg,
Temperature 300 °C
7.0 g/10 min
@Load 2.65 lb,
Temperature 572 °F
ASTM D 1238
 
7.0 g/10 min
@Load 1.20 kg,
Temperature 300 °C
7.0 g/10 min
@Load 2.65 lb,
Temperature 572 °F
[cm^3/10 min] Melt Volume Rate; ISO 1133
Mechanical Properties力学性能
Metric公制数据
English英制数据
Comments测试方法
Tensile Strength at Break断裂拉伸强度
87.0 MPa
12600 psi
Type I, 5 mm/min; ASTM D 638
 
90.0 MPa
13100 psi
5 mm/min; ISO 527
Tensile Strength, Yield屈服拉伸强度
90.0 MPa
13100 psi
Type I, 5 mm/min; ASTM D 638
 
95.0 MPa
13800 psi
5 mm/min; ISO 527
Elongation at Break断裂伸长率
3.2 %
3.2 %
5 mm/min; ISO 527
Elongation at Yield屈服伸长率
2.8 %
2.8 %
5 mm/min; ISO 527
 
3.1 %
3.1 %
Type I, 5 mm/min; ASTM D 638
Tensile Modulus拉伸模量
5.50 GPa
798 ksi
5 mm/min; ASTM D 638
 
6.00 GPa
870 ksi
1 mm/min; ISO 527
Flexural Yield Strength弯曲屈服强度
140 MPa
20300 psi
2 mm/min; ISO 178
 
156 MPa
22600 psi
1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus弯曲弹性模量
5.00 GPa
725 ksi
1.3 mm/min, 50 mm span; ASTM D 790
 
5.50 GPa
798 ksi
2 mm/min; ISO 178
Izod Impact, Notched悬臂梁缺口冲击强度  
1.07 J/cm
@Temperature -30.0 °C
2.00 ft-lb/in
@Temperature -22.0 °F
ASTM D 256
 
1.10 J/cm
@Temperature 23.0 °C
2.06 ft-lb/in
@Temperature 73.4 °F
ASTM D 256
Izod Impact, Notched悬臂梁缺口冲击强度 (ISO)  
6.00 kJ/m²
@Temperature -30.0 °C
2.86 ft-lb/in²
@Temperature -22.0 °F
80*10*3; ISO 180/1A
 
7.00 kJ/m²
@Temperature 23.0 °C
3.33 ft-lb/in²
@Temperature 73.4 °F
80*10*3; ISO 180/1A
Izod Impact, Unnotched悬臂梁无缺口冲击强度 (ISO)
35.0 kJ/m²
@Temperature 23.0 °C
16.7 ft-lb/in²
@Temperature 73.4 °F
80*10*3; ISO 180/1U
 
35.0 kJ/m²
@Temperature -30.0 °C
16.7 ft-lb/in²
@Temperature -22.0 °F
80*10*3; ISO 180/1U
Charpy Impact Unnotched夏比缺口试样冲击
4.00 J/cm²
@Temperature 23.0 °C
19.0 ft-lb/in²
@Temperature 73.4 °F
Edgew 80*10*3 sp=62mm; ISO 179/1eU
 
4.00 J/cm²
@Temperature -30.0 °C
19.0 ft-lb/in²
@Temperature -22.0 °F
Edgew 80*10*3 sp=62mm; ISO 179/1eU
Charpy Impact, Notched夏比缺口冲击
0.500 J/cm²
@Temperature -30.0 °C
2.38 ft-lb/in²
@Temperature -22.0 °F
V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA
 
0.600 J/cm²
@Temperature 23.0 °C
2.86 ft-lb/in²
@Temperature 73.4 °F
V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA
Impact Test冲击试验数据
20.0 J
@Temperature 23.0 °C
14.8 ft-lb
@Temperature 73.4 °F
Instrumented Impact Total Energy; ASTM D 3763
Electrical Properties电性能
Metric公制数据
English英制数据
Comments测试方法
Volume Resistivity体积电阻率
>= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
IEC 60093
Surface Resistance表面电阻
>= 1.00e+15 ohm
>= 1.00e+15 ohm
ROA; IEC 60093
Dielectric Constant介电常数  
3.3
@Frequency 1.00e+6 Hz
3.3
@Frequency 1.00e+6 Hz
IEC 60250
 
3.3
@Frequency 50.0 - 60.0 Hz
3.3
@Frequency 50.0 - 60.0 Hz
IEC 60250
Dissipation Factor耗散因数
0.010
@Frequency 1.00e+6 Hz
0.010
@Frequency 1.00e+6 Hz
IEC 60250
 
0.020
@Frequency 50.0 - 60.0 Hz
0.020
@Frequency 50.0 - 60.0 Hz
IEC 60250
Arc Resistance电弧电阻
0.00 - 60 sec
0.00 - 60 sec
Tungsten, PLC code 7; ASTM D 495
Comparative Tracking Index跟踪指数
175 - 250 V
175 - 250 V
PLC code 3; UL 746A
Hot Wire Ignition, HWI 热线圈点燃测试
>= 120 sec
>= 120 sec
PLC code 0; UL 746A
High Amp Arc Ignition, HAI高电流电弧点燃测试
15 - 30 arcs
15 - 30 arcs
surface, PLC code 3; UL 746A
High Voltage Arc-Tracking Rate, HVTR高压电弧跟踪速度
80.0 - 150 mm/min
3.15 - 5.91 in/min
PLC code 3; UL 746A
Thermal Properties热性能
Metric公制数据
English英制数据
Comments测试方法
CTE, linear, Parallel to Flow线性热膨胀系数  
30.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
16.7 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 
30.0 µm/m-°C
@Temperature 23.0 - 80.0 °C
16.7 µin/in-°F
@Temperature 73.4 - 176 °F
ISO 11359-2
CTE, linear, Transverse to Flow 线性热膨胀系数/横向
70.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
38.9 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 
70.0 µm/m-°C
@Temperature 23.0 - 80.0 °C
38.9 µin/in-°F
@Temperature 73.4 - 176 °F
ISO 11359-2
Deflection Temperature at热变形温度0.46 MPa (66 psi) 
141 °C
286 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
Deflection Temperature at热变形温度1.8 MPa (264 psi) 
136 °C
277 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
 
141 °C
@Thickness 3.20 mm
286 °F
@Thickness 0.126 in
unannealed; ASTM D 648
Vicat Softening Point维卡软化点
145 °C
293 °F
Rate B/50; ISO 306
 
146 °C
295 °F
Rate B/120; ISO 306
 
147 °C
297 °F
Rate B/50; ASTM D 1525
UL RTI, Electrical相对温度指数
130 °C
266 °F
UL 746B
UL RTI, Mechanical with Impact机械冲击热指数
130 °C
266 °F
UL 746B
UL RTI, Mechanical without Impact无机械冲击热指数
130 °C
266 °F
UL 746B
Flammability, UL94阻燃等级  
V-0
@Thickness 1.50 mm
V-0
@Thickness 0.0591 in
UL 94
 
5VA
@Thickness 3.00 mm
5VA
@Thickness 0.118 in
UL 94
Oxygen Index氧指数
40 %
40 %
LOI; ISO 4589
Glow Wire Test灼热丝测试  
825 °C
@Thickness 1.00 mm
1520 °F
@Thickness 0.0394 in
Glow Wire Ignitability Temperature; IEC 60695-2-13
 
960 °C
@Thickness 1.00 mm
1760 °F
@Thickness 0.0394 in
Glow Wire Flammability Index; IEC 60695-2-12
在线客服
热线电话
13652631743